Introduction to the embeded systems and robotics

-

Introduction to embedded systems and robotics:

Introduction to embedded systems and robotics
Introduction to embedded systems and robotics
Hey friends, you are mostly welcome to my blog "s@robotics".I'm souvik,a physics lover and from this platform you may learn robotics easily for free.I promise you to upload two posts on Thursday and Sunday of each week.I will cover those following contents throughout my posts sequentially.
There are mainly three parts i.e- Digital electronics,embedded system and Robotics.And these parts will be devided into some subtopics written below.

Contents covered:

A. Digital Electronics:

  • Basics of digital electronics
  • Some integrated circuits and their implementation

B. Embedded systems:

  • Introduction to microcontrollers
  • Code vision AVR (CVAVR)
  • Introduction to Atmega 16 microcontroller
  • I/O ports
  • LCD interfacing
  • UART communication
  • Timers
  • SPI [serial peripheral interface]
  • ADC [analog to digital converter]
  • Interrupts

C. Robotics:

  • Introduction to autonomous robots
  • Motor driver
  • Sensors
And i will post a project based on robotics every month.So friends let's enjoy the world of robotics.Thank you.

Comments

Post a Comment

Popular posts from this blog

Electronics projects #1: Making a emergency mini usb mobile charger using 7805 IC

-
Image
Making a mini usb mobile charger using 7805 voltage regulator ic: Introduction: Mobile phones,are essential commodity in nowadays life.There are often when we find ourselves in those situations when our phone's battery level is about to go off,leaving us in emergency.people generally keep powerbanks or car chargers with themselves but they are also useful upto an extent. In this post i've decided to make a useful project on 7805 voltage regulator IC that can be used to charge a device with a 9v battery or any 12v car battery.so next time you find yourself in tough situation,just buy a 9v battery at the corner shop and you will have enough power to handle the emergency situations. *it's recommended to use a high current 9v battery like Duracell or energiser.A normal cheap Chinese battery will not provide enough backup. Step 1: Gather these parts: At first you have to gather or buy those underwritten parts from anywhere. 7805 IC along with heatsink and nut bolt...
Read more

Digital electronics:some integrated circuits and their implementation

-
Image
Some integrated circuits and their implementation: some ics and their implementation In previous post i talked about  the basics of digital electronics ,if you don't see this you can read this post  here .Now we discuss about some integrated circuits and their implementation according to  the schedule  sequentially.So let's learn- 555 timer IC: The 555 is a single chip version of a commonly used circuit called a  multivibrator . The IC used in a variety of timer,pulse generation, and oscillator applications. The 555 timer has three modes- monostable,astable and bistable. 555 timer ic pinout Monostable mode: Monostable or 'one shot' mode,produces a single pulse of a set length in response to a trigger input.Here's the formulas written below to find out the time (T),capacitance (c) and resistance (R)-        T=1.1RC        C= T/1.1R        R= T/1.1c Monostable mode of ...
Read more